Rain chains look very attractive and increase beauty of house, as well. It is mainly used for exterior decoration in facing areas of the house such as lawn, garden and courtyard. Rain chains are designed in stylish way and look fabulous when they are placed to beautify the garden or porch. Apart from being an appealing and traditional method to transport the water from top of the roofs to the ground. Rain chain helps in reducing water pollution, soil erosion and helpful in water runoff. Give attractive look to your home with amazing rain chains.
So Here We Go
Give A Style To Home Through Rain Chain:
Before placing a rain chain, there are few materials which will be required like extra screw, basin, plastic sheeting and chain. Set the basin that catches the water when water is flowing from the roof. Place the basin in correct way so that chain position should be straight.
Put some stones in basin and cut the given sod with the help of spade. Remove the sod and cover the given empty spot with the help of plastic sheet and small gravels. Arrange few stones on the top of rock-strewn. Place the stone on basin and attach the chain with the given ring on basin. Tie the extra screw to the support of chain. Now enjoy the pleasant sound of water during rainy days.
Spoon Based Rain Chain
Spoon rain chain is also very attractive and can be made at home. First decide how long the rain chain should be then bend the spoon according to requirement. Drill the small holes on the handle of the spoon. Now, attach the spoon in such a way that the bowls are faced in outward direction.
Use the bowl less handles in middle of the handles of every two spoon. Leave the space of 2 inches in every spoon and wrap the handles of spoon tightly. Repeat this process on all over the chain so that chain is covered with spoon. Now hang or placed the chain on tree or the place where water can direct flow to the ground through it. Enjoy this rain barrel in the garden.
Attractive And Stylish Copper Chain
Copper rain chain also looks beautiful when water passes through it during rainy days. Wrap the copper wire all around the PVC tube. Give the stylish look to chain and cut the rings with cutter that are in the form of coil. Adjust the given ring in proper manner so that the ring ends with single line up.
Since, copper is good conductor of heat, you can mould it little by heating so that other rings can be fitted properly. Now insert the copper ring with each other and hang it to the tree or in the garden. Copper rings look more attractive when water flows through it.
Aluminium Funnels Rain Chain
Take multiple aluminium funnels and make two holes in every funnel for creating crossbar bolts. Using a drill you can make holes in funnels as well as one bolt and three nuts together will form crossbars. Take care of threading the funnels through crossbars in the right way and screwing the chain in the next nut below at about 8 to 10 inches. Continue making the chain with multiple aluminium funnels in this way.
Terracotta Rain Chain
Preparing this rain chain is easier as it needs nothing but about 8 to 10 small sized terracotta pots. You may find the pots with prepared holes within them at the bottom side. You can also make the size of holes larger by using a nose needle pliers. With the help of a thin series, you can join the terracotta pots together, leaving some space among them and ending it towards a big terracotta saucer.
Copper Rings Stone Chain
Just take soft copper wire and wrap it around a PVC pipe for preparing copper rings. After setting the rings properly, cut down the rings with the help of pliers. Now join the copper rings with each other for preparing the chain and solder the open parts of every copper ring. You can tie up stones in central regions of copper rings in an alternative manner so that it will become more feasible to store the rain water.
Stylish Coloured Neon Chain
Stylish coloured neon wired chain look very beautiful and amazing. It is made up of colourful neon wires and tied up with colourful beads. To make chain this chain neon wire and coloured beads will be required. Fold the neon wire in such a way so that large loops are made in it. Now tie the zip and bead with every loop. Continue this method till the required length. Hang this beautiful chain to the accurate place.
Apart from these rain chains, there are many more chains like teapot rain chain, terracotta rain chain and so on.